⚡️Grower's Choice Master Pursuit 1000 Watt CMH Double Ended All in One Fixture⚡️

Description

⚡️
Grower's Choice Master Pursuit 1000W Double Ended All in One Fixture
⚡️
. Condition is New.
Introducing the MASTER PURSUIT series 1000-watt CMH grow light system: Industrial-Grade power with dual ultra high-efficiency 500-watt Ceramic Metal Halide lamps. Delivers DEEP canopy penetration with broad-true full horticultural spectrum from top to the very bottom. Focus-designed for specialty plants and bio-engineered to replicate and harness the full brilliance of the sun. Enables growers to mix spectral color levels for optimal development for each stage of growth. Adjusting specific spectrum color levels creates unique recipes for maximum strain and terpenes quality.
Grower's Choice Master Pursuit 1000W Double Ended Fixture Features:
Integrated Lighting
Wide Input Voltage range 208-277VAC / 50-60Hz
Active PFC 0.99 (Max) High efficiency, Low THD
Intelligent Self Diagnostic System
Soft start and Staggered ignition eliminates circuit inrush and protects lamp
Run Double ended 1000w bulb at 800W / 1000W / 1100W Master Pursuit
Multiple Protections OVP, UVP, OTP, SCP, OCP
Remote controlled
Working status displey
3 Year Warranty
Grower's Choice Master Pursuit 1000W Double Ended Fixture Specs:
Rated Main Voltage: 208V 240V 277V
Input Current: 5.1A | 4.4A | 3.8A
Input Frequency: 50/60 Hz
Power Factor: >0.98
THD: <10%, 208-277VAC, 100% Load
Required Lamp Voltage: 200-280V
Illumination Surface: 10' X 10'
Start Up Time: 3-10 Second
Bulb Failure Detection: Yes
Protections: Open Circuit Protection, Short Circuit Protection, Over Voltage Protection, Under Voltage Protection, Over Temperature Protection
Technical Specifications
208-277V
277-347V
Rated Main Voltage:
Input Current:
Input Frequency:
Power Factor:
THD:
Required Lamp Voltage:
Illumination Surface:
208V 240V 277V 347V
5.1A 4.4A 3.8A 3.1A
50/60 Hz
>0.98
<10%
110V ~ 140V
Indoor 5' X 5' , Green house 8' X 8'
NEW FEATURES INCLUDE:
The Master Pursuit line utilizes an updated horizontal case to reflector design which accommodates more canopy space. This new case design is reinforced to protect the fixtures internal components and employs heat sinks with greater surface area, translating to better heat distribution, providing further protection, longer fixture life and better efficiency performance.
Clips: Improved ceramic lamp clips keep lamps secure, last longer than plastic clips and redistribute heat better.
Lamp Catch: Innovative safety device prevents damage due to dislodged or improperly installed lamps.
Level: Integrated bubble level provides a visual reference to verify horizontal mounting consistency.
Reflector: Redesigned reflector provides greater heat redistribution, improves cross lighting and PPFD.
Cords: Uses quality hard wired power cords with M25 connectors provide IP65 water resistance.
Dual Ports: Two receptacles for the master controller eliminate the need for split devices or adapters.
AI Ignition Control
This revolutionary feature, unique to our products, makes GC Series Digital Ballast the safest and most reliable ballast when used in automated multiple lamp applications. When multiple units are connected to the same mains circuit, our integrated Ignition Control software will completely balance the electrical draw by igniting one lamp at a time to prevent electrical surges and spikes that can overload the mains circuit and trip circuit breaking systems. For further efficiency, this feature is activated alongside our 'Soft Start Technology'.
Soft Start Technology
Soft Start Technology prolongs lamp life by stopping current rush to the lamp and preventing lamp overload. When the ballast is started from cold there will be a 3 second fixed delay before ignition. After ignition there will be a series of random 0-2 second delays before full brightness is reached after approximately 3-5 minutes. SoftStart Technology is also activated when increasing and decreasing power to the lamp using the 'Smart-Step' feature.
Re-Strike of Hot Lamp after Mains Failure:
The GC Series Digital Ballast uses a timed re-strike system that prevents the ballast from re-striking a hot lamp after a power failure. If a hot lamp is detected, the re-strike will be delayed for 60 second intervals until the lamp has cooled sufficiently to be re-ignited. Re-ignition is then controlled by 'SmartStart Ignition Control' and 'Soft Start Technology' software.
​
Lamp Compatibility
The GC Series Digital Ballast is suitable for use with all good quality HPS, Metal Halide and Ceramic Metal Halide lamps. For a guaranteed perfect match and the best results we recommend Grower’s Choice horticultural lamps. Grower’s Choice lamps are optimized for use with high efficiency electronic ballasts with adjustable output.